_______________________Submerged Arc________________________
_____________________________________________________________
Thyristor Controlled SAW Power Source
Model: DC630B/ DC1000B/ DC1300B/ DC1600B
Amp Range: 630A/ 1000A/ 1300A/ 1600A
Input Voltage: 415V 3P 50Hz
Input Power: 40/ 68/ 88/ 120KVA
Weight: 320/ 480/ 510/ 610Kg
Duty Cycle: 100%
Amp Range: 630A/ 1000A/ 1300A/ 1600A
Input Voltage: 415V 3P 50Hz
Input Power: 40/ 68/ 88/ 120KVA
Weight: 320/ 480/ 510/ 610Kg
Duty Cycle: 100%
Welding Tractors (LT-7)
-Model: LT7-630L02
-Applicable Wire Diameter: 2.0/ 2.4/ 3.2/ 4.0
-Wire Feed Speed: 30-300
-Welding Speed: 9-75
-Flux Capacity: 8L
-Wire Reel Capacity: 30Kg
-Weight: 52
-Applicable Wire Diameter: 2.0/ 2.4/ 3.2/ 4.0
-Wire Feed Speed: 30-300
-Welding Speed: 9-75
-Flux Capacity: 8L
-Wire Reel Capacity: 30Kg
-Weight: 52
Welding Tractors (LT-7)
-Model: LT7-1300L02
-Applicable Wire Diameter: 2.0/ 3.2/ 4.0/ 4.8
-Wire Feed Speed: 16-160
-Welding Speed: 9-75
-Flux Capacity: 8L
-Wire Reel Capacity: 30Kg
-Weight: 52
-Applicable Wire Diameter: 2.0/ 3.2/ 4.0/ 4.8
-Wire Feed Speed: 16-160
-Welding Speed: 9-75
-Flux Capacity: 8L
-Wire Reel Capacity: 30Kg
-Weight: 52
_______________________Water Cooler Unit______________________
_____________________________________________________________
Water Cooler Recirculator
-Model: WR3000
-Amp Range: 230V 1P 50Hz
-Tank Capacity: 9Liter
-Flow Rate: 8.5/min at 6mH
-Operation Temperature: -20°C~60°C
-Weight: 16Kg
-Duty Cycle: 100%
-Amp Range: 230V 1P 50Hz
-Tank Capacity: 9Liter
-Flow Rate: 8.5/min at 6mH
-Operation Temperature: -20°C~60°C
-Weight: 16Kg
-Duty Cycle: 100%
________________________Welding Gauge_______________________
_____________________________________________________________
Taper Welding Gauge
-Model: ATP 15
-Measure opening, slot width, hole size, etc.
-Made of stainless steel
-Measure opening, slot width, hole size, etc.
-Made of stainless steel
Hi-Lo Welding Gauge
-Model: HL B002
-Measure internal alignment of pipe after fir-up / alignment, cuts radiographic rejects.
-Measure internal misalignment of pipe before and after tracking.
-Measurements read in standard on one side and metric on the opposite site.
-Measure internal alignment of pipe after fir-up / alignment, cuts radiographic rejects.
-Measure internal misalignment of pipe before and after tracking.
-Measurements read in standard on one side and metric on the opposite site.
Single Purpose Hi-Lo Welding Gauge
-Model: HL B004
Steps check internal alignment:-Unlock the retaining screw. Press the gauge legs beyond the barrel.
-Insert the legs (wires) into the root gap. Turn the gauge 90°, being careful to apply a constant back pressure to the barrel.
-Hold the gauge to obtain an accurate reading.
-Lock the retaining screw. Reverse the 90° turn and remove.
-Increment opposite the red line.
Steps check internal alignment:
-Insert the legs (wires) into the root gap. Turn the gauge 90°, being careful to apply a constant back pressure to the barrel.
-Hold the gauge to obtain an accurate reading.
-Lock the retaining screw. Reverse the 90° turn and remove.
-Increment opposite the red line.
Cambridge Type Gauge
-Model: CT-8
-The gauge is specially used for the measurement of the bevel angle, height, width, gap and undercut depth of weldment, suitable for the direction of boilers, bridges, ships, pressure vessels and oil pipes.
-It is made of stainless steel and is characterized by portable and compact structure, easy operation and wide application.
-The gauge is specially used for the measurement of the bevel angle, height, width, gap and undercut depth of weldment, suitable for the direction of boilers, bridges, ships, pressure vessels and oil pipes.
-It is made of stainless steel and is characterized by portable and compact structure, easy operation and wide application.
Fillet Weld Gauge
-Model: FWG-1
-Fillet weld gauge allows fast, accurate measurement of seven (7) fillet weld size: 3.2mm - 4.8mm / 7.9mm - 11.1mm / 9.5mm - 12.7mm / 6.4mm - 15.9mm / 19.1mm - 22.2mm / 22.2mm - 25.4mm / 19.1mm - 25.4mm their metric equivalents, to determine weld sizes, either concave or convex.
-Each gauge blade is made of 1-1/4” x 4” cold rolled stainless steel to resists rust and bending.
-Fillet weld gauge allows fast, accurate measurement of seven (7) fillet weld size: 3.2mm - 4.8mm / 7.9mm - 11.1mm / 9.5mm - 12.7mm / 6.4mm - 15.9mm / 19.1mm - 22.2mm / 22.2mm - 25.4mm / 19.1mm - 25.4mm their metric equivalents, to determine weld sizes, either concave or convex.
-Each gauge blade is made of 1-1/4” x 4” cold rolled stainless steel to resists rust and bending.
